EVERACTIVE

Processor charger 12v / 24v everactive cbc-10 v2

EVERACTIVE

Processor charger 12v / 24v everactive cbc-10 v2

[{"value":"1","url":"/on/demandware.store/Sites-Jinius-Site/en_GB/Product-OfferAvailability?p11Quantity=2&pid=243784&productId=56515fad-3976-4848-a211-c4c12b406e5b&quantity=1"},{"value":"2","url":"/on/demandware.store/Sites-Jinius-Site/en_GB/Product-OfferAvailability?p11Quantity=2&pid=243784&productId=56515fad-3976-4848-a211-c4c12b406e5b&quantity=2"}]
+
from €89.00 to - 11% €79.00
395
Points earned
  • You can earn Antamivi points every time you make a payment using your Bank of Cyprus cards.
  • The number of Antamivi points and the corresponding amount of money displayed are indicative and may vary from time to time. Want to know more? Check out our FAQs here.
  • If you are an eligible member of the Bank of Cyprus loyalty scheme Pronomia, you will receive additional Antamivi points based on your assigned tier.
Estimated delivery time: 3 - 5 days
Estimated delivery price: Free shipping

Description

Item No. 56515fad-3976-4848-a211-c4c12b406e5b

- Intelligent, processor charger for popular 12V and 24V batteries used in the automotive and industry. Perfect for car, motorcycle, lead acid, gel and AGM batteries.
- Type - digital, pulsed.
- Charging current - 2A / 5A / 10A.
- Detachable output cable with SAE quick-connector . Crocodile clips and eyelet connectors included

The charger is intelligent, microprocessor-controlled - when fully charged, it automatically turns off, going into voltage monitoring mode - 100 safe for each battery.
The efficiency of our charger is comparable to the charging process in leading professional devices even many times more expensive - using a smart charger does not adversely affect the operation of the battery , on the contrary, it extends its lifetime!

The charger is dedicated not only to large-capacity car batteries - thanks to the charging current regulation, it is also suitable for gel batteries, motorcycle batteries used on yachts or batteries for scooters with a smaller capacity.

Unlimited possibilities - our charger is equipped with a unique, detachable cable with SAE quick connector. This enables the charger to be adapted to your installation without any problems, when the included cables with alligator clips and eyelet terminals are insufficient.

The charger uses modern solutions:

- automatic and reliable battery charge control - after reaching a certain voltage or automatic decrease of the charging current,
- voltage monitoring after completion of charging - automatic resumption of charging in the event of a voltage drop on the battery, also after a power failure from the AC network ,
- the charger eliminates the sulfation of batteries that may occur during charging,
- maintenance mode for 12V / SLA batteries with a capacity of 14-230Ah - the charger gives a constant voltage of 13.6V with a current of up to 5A - keeps the battery fully ready - ideal for electric vehicles, forklifts, etc.
- 13.6V / 5A power supply mode - the ability to power devices powered from 12V.
- winter mode - guarantees full and effective battery charging, even in very low ambient temperature
- reactivation / resuscitation mode - a special charging mode - in the case of extremely discharged batteries, the charger uses a reduced charging current of 1.5A , until a safe voltage is reached allowing for faster charging - the charger itself decides whether to use this mode,
- a detachable cable equipped with a quick-connector type SAE, allows you to adjust the charger to your needs, the standard equipment includes terminals with alligator clips and eyelet terminals ,
- charger equipped with a set of protections against short-circuits, against incorrect polarity connection, against overheating, overloading, overcharging, etc.

Details