For delivery by 31.12, order by 27.12 and select a pick-up point
Decorators varnish dead flat clear 500ml
POLYVINE
Decorators varnish dead flat clear 500ml
POLYVINE
Decorators varnish dead flat clear 500ml
[{"value":"1","url":"/on/demandware.store/Sites-Jinius-Site/en_GB/Product-OfferAvailability?p11Quantity=2&pid=1280766&productId=58e13344-e58e-43b3-a7ea-7c7d069eb2ed&quantity=1"},{"value":"2","url":"/on/demandware.store/Sites-Jinius-Site/en_GB/Product-OfferAvailability?p11Quantity=2&pid=1280766&productId=58e13344-e58e-43b3-a7ea-7c7d069eb2ed&quantity=2"}]
–+
€16.95
82
Points earned
- You can earn Antamivi points every time you make a payment using your Bank of Cyprus cards.
- The number of Antamivi points and the corresponding amount of money displayed are indicative and may vary from time to time. Want to know more? Check out our FAQs here.
- If you are an eligible member of the Bank of Cyprus loyalty scheme Pronomia, you will receive additional Antamivi points based on your assigned tier.
In stock
Estimated delivery time:
3
-
5
days
Description
Item No.
58e13344-e58e-43b3-a7ea-7c7d069eb2ed
A unique, clear acrylic varnish that uses nano-technology to protect a wide range of decorative surfaces.
It is available in gloss for a shiny finish, satin for depth and a soft sheen, dead flat for a completely shine-free surface.
Specifications
- Interior and exterior
- water resistant
- Stain-resistant
- abrasion resistant
- heat resistant
- UV filter protection
- quick drying
- microporous
- nanotechnology
- water wash-up
- food and child safe
- drying time: 1 hour
- coverage: 15-20 square metres per litre
Suitable for: internal wood • fabric • paintwork • wallpaper (not vinyl) • plaster work • murals • mouldings
Preparation
All surfaces must be clean and free from dust, dirt, oil and contamination.Application
Ensure the product is well mixed but do not shake. Thinly apply 2 to 3 coats of varnish. On porous surfaces dilute the first coat with 10% water. When using a dead flat finish, for a high level of protection and stain resistance, apply 2 coats of satin then 1 coat of dead flat.Caution
Always test for clarity over dark colours. Application over emulsion paint can draw contaminants through the paint film. Should not be applied over uncured oil based products. Test for compatibility before application. Not suitable for exterior bare timber or vinyl wall covering.Storage
Protect from extremes of temperature during storage and application.Health, safety and the environment
Non-hazardous. Ensure good ventilation.Keep out of reach of children.
Contact with eyes - wash immediately with warm water.
Remove excess from tools and mixing vessels before washing in warm soapy water.
Do not empty into drains or watercourses.