For home delivery by 31.12, order by 23.12 or select a pick-up point by 27.12
Pgp beton filler grey 1kg
PGP
Pgp beton filler grey 1kg
PGP
Pgp beton filler grey 1kg
[{"value":"1","url":"/on/demandware.store/Sites-Jinius-Site/en_GB/Product-OfferAvailability?p11Quantity=3&pid=1280719&productId=bfcd8088-55b0-409c-bfc7-e73d40de5307&quantity=1"},{"value":"2","url":"/on/demandware.store/Sites-Jinius-Site/en_GB/Product-OfferAvailability?p11Quantity=3&pid=1280719&productId=bfcd8088-55b0-409c-bfc7-e73d40de5307&quantity=2"},{"value":"3","url":"/on/demandware.store/Sites-Jinius-Site/en_GB/Product-OfferAvailability?p11Quantity=3&pid=1280719&productId=bfcd8088-55b0-409c-bfc7-e73d40de5307&quantity=3"}]
–+
€4.80
22
Points earned
- You can earn Antamivi points every time you make a payment using your Bank of Cyprus cards.
- The number of Antamivi points and the corresponding amount of money displayed are indicative and may vary from time to time. Want to know more? Check out our FAQs here.
- If you are an eligible member of the Bank of Cyprus loyalty scheme Pronomia, you will receive additional Antamivi points based on your assigned tier.
In stock
Estimated delivery time:
3
-
5
days
Description
Item No.
bfcd8088-55b0-409c-bfc7-e73d40de5307
PGP BETON FILLER is a ready to use elastic concrete filler reinforced with ceramic microspheres ideal for filling cracks and joints. Does not crack or shrink due to its formulation based on acrylic PVA and ceramic microspheres. Withstands surface movements and vibrations. It is easily sanded and has thermo insulation properties. Its gray colour blends with cementitious substrates. May be applied on concrete, plaster, drywall, bricks, stones, render and wood.
ADVANTAGES
- Ready mixed formula
- Reinforced with ceramic microspheres
- Very elastic
- Fills easily uneven breaks
- Excellent surface adhesion properties
- Dries fast and can be easily sanded
- Presents low shrinkage – does not crack
- Excellent mould resistance
- Paintable
- Interior and exterior use
APPLICATIONS
- Fills cracks up to 6cm deep and 2cm wide as well as concrete irregularities
- It is suitable for concrete surfaces, plaster, plasterboards, cementboards, wood, bricks, stone etc.
INSTRUCTIONS FOR USE
- Surfaces must be dry and clean from dust, grease and loose particles and other contamination
- For deeper cracks or joints application of water-based acrylic primer is necessary
- Apply with a spatula or spreader
- Press the filler onto the surface to a maximum depth of 3mm
- For deep cavities apply fiber or plastic reinforcing net
- Fill hole proud to allow for sanding and finish with a wet knife
- Once dry, sand to a smooth finish
- The final surface may be primed and painted
- Close lid immediately after use to prevent drying
It is advisable to perform a suitability test prior to full scale application
REMARKS
- Do not use to fill plastics or metals
- Do not apply externally when rain is imminent (within 5 hours of application)
- Do not apply at temperatures (ambient and surface) below 5oC
- Not suitable for repairs to permanently wet areas
 |  |  |  |
Coverage: acording to application | Thinning: no | Application: by knife | Touch dry: 30 minutes 20oC |
 |  |  |  |
Hard dry: 1 - 2 hours 20oC | Exterior use | Interior use | Application temperature: 10oC - 35oC |
 | |||
Cleaning: with water |